Step 4 - Process configuration
========================================
The fourth step is to configure the replication processes for each replication. Although most options have reasonable defaults, manual input is required. Following processes are defined:
1: MINE on orcl
Not configured.
2: APPLY on test11202
Not configured.
3: MINE1 on test11202
Not configured.
4: APPLY1 on orcl
Not configured.
Enter number of process to modify it, or "done": [1]
Fully qualified name of the server for the process (usually co-located with the database, unless mine is offloaded using fetcher): [rac11202node1]
Enable email notifications about problems (yes/no)? [YES] NO
Enable SNMP traps/notifications about problems (yes/no)? [NO]
Directory with DDC file and default where to create log files etc. (recommended: same as global setting, if possible)? [/home/oracle/orcl] Following settings were pre-filled with defaults or your reloaded settings:
----------------------------------------
[MINE_LISTEN_INTERFACE]: Network listen interface: rac11202node1:7901
[MINE_DATABASE]: Database TNS: orcl
[TNS_ADMIN]: tnsnames.ora path: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
[MINE_USER]: Replicate database username: dbvrep
[MINE_PASSWORD]: Replicate database password: *********
[ORACLE_HOME]: ASM ORACLE_HOME: /u01/app/11.2.0/grid
[MINE_PLOG]: Filemask for generated plogs: /home/oracle/orcl/mine/%S.%E (%S is sequence, %T thread, %F original filename (stripped extension), %P process
type, %N process name, %E default extension)
[LOG_FILE]: General log file: /home/oracle/orcl/log/dbvrep_%N_%D.%E
[LOG_FILE_TRACE]: Error traces: /home/oracle/orcl/log/trace/dbvrep_%N_%D_%I_%U.%E Checking that these settings are valid...
Do you want change any of the settings? [no] Following processes are defined:
1: MINE on orcl
Host: rac11202node1, SMTP: NO, SNMP: NO
2: APPLY on test11202
Not configured.
3: MINE1 on test11202
Not configured.
4: APPLY1 on orcl
Not configured.
Enter number of process to modify it, or "done": [2]
<usually co-located with the database, unless mine is offloaded using fetcher): [dbvisit400.dbvisit.com]
Enable email notifications about problems (yes/no)? [YES] NO
Enable SNMP traps/notifications about problems (yes/no)? [NO]
Directory with DDC file and default where to create log files etc. (recommended: same as global setting, if possible)? [/home/oracle/orcl] Following settings were pre-filled with defaults or your reloaded settings:
----------------------------------------
[APPLY_LISTEN_INTERFACE]: Network listen interface: dbvisit400.dbvisit.com:7902
[APPLY_DATABASE]: Database TNS: test11202
[TNS_ADMIN]: tnsnames.ora path: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
[APPLY_USER]: Replicate database username: dbvrep
[APPLY_PASSWORD]: Replicate database password: *********
[APPLY_STAGING_DIR]: Directory for received plogs: /home/oracle/orcl/apply
[LOG_FILE]: General log file: /home/oracle/orcl/log/dbvrep_%N_%D.%E
[LOG_FILE_TRACE]: Error traces: /home/oracle/orcl/log/trace/dbvrep_%N_%D_%I_%U.%E Checking that these settings are valid...
Do you want change any of the settings? [no] Following processes are defined:
1: MINE on orcl
Host: rac11202node1, SMTP: NO, SNMP: NO
2: APPLY on test11202
Host: dbvisit400.dbvisit.com, SMTP: NO, SNMP: NO
3: MINE1 on test11202
Not configured.
4: APPLY1 on orcl
Not configured.
Enter number of process to modify it, or "done": [3]
<usually co-located with the database, unless mine is offloaded using fetcher): [dbvisit400.dbvisit.com]
Enable email notifications about problems (yes/no)? [YES] NO
Enable SNMP traps/notifications about problems (yes/no)? [NO]
Directory with DDC file and default where to create log files etc. (recommended: same as global setting, if possible)? [/home/oracle/orcl] Following settings were pre-filled with defaults or your reloaded settings:
----------------------------------------
[MINE_LISTEN_INTERFACE]: Network listen interface: dbvisit400.dbvisit.com:7903
[MINE_DATABASE]: Database TNS: test11202
[TNS_ADMIN]: tnsnames.ora path: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
[MINE_USER]: Replicate database username: dbvrep
[MINE_PASSWORD]: Replicate database password: *********
[MINE_PLOG]: Filemask for generated plogs: /home/oracle/orcl/mine1/%S.%E (%S is sequence, %T thread, %F original filename (stripped extension), %P process
type, %N process name, %E default extension)
[LOG_FILE]: General log file: /home/oracle/orcl/log/dbvrep_%N_%D.%E
[LOG_FILE_TRACE]: Error traces: /home/oracle/orcl/log/trace/dbvrep_%N_%D_%I_%U.%E Checking that these settings are valid...
Do you want change any of the settings? [no] Following processes are defined:
1: MINE on orcl
Host: rac11202node1, SMTP: NO, SNMP: NO
2: APPLY on test11202
Host: dbvisit400.dbvisit.com, SMTP: NO, SNMP: NO
3: MINE1 on test11202
Host: dbvisit400.dbvisit.com, SMTP: NO, SNMP: NO
4: APPLY1 on orcl
Not configured.
Enter number of process to modify it, or "done": [4]
Fully qualified name of the server for the process (usually co-located with the database, unless mine is offloaded using fetcher): [rac11202node1]
Enable email notifications about problems (yes/no)? [YES] NO
Enable SNMP traps/notifications about problems (yes/no)? [NO]
Directory with DDC file and default where to create log files etc. (recommended: same as global setting, if possible)? [/home/oracle/orcl] Following settings were pre-filled with defaults or your reloaded settings:
----------------------------------------
[APPLY_LISTEN_INTERFACE]: Network listen interface: rac11202node1:7904
[APPLY_DATABASE]: Database TNS: orcl
[TNS_ADMIN]: tnsnames.ora path: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
[APPLY_USER]: Replicate database username: dbvrep
[APPLY_PASSWORD]: Replicate database password: *********
[APPLY_STAGING_DIR]: Directory for received plogs: /home/oracle/orcl/apply1
[LOG_FILE]: General log file: /home/oracle/orcl/log/dbvrep_%N_%D.%E
[LOG_FILE_TRACE]: Error traces: /home/oracle/orcl/log/trace/dbvrep_%N_%D_%I_%U.%E Checking that these settings are valid…
Do you want change any of the settings? [no] Following processes are defined:
1: MINE on orcl
Host: rac11202node1, SMTP: NO, SNMP: NO
2: APPLY on test11202
Host: dbvisit400.dbvisit.com, SMTP: NO, SNMP: NO
3: MINE1 on test11202
Host: dbvisit400.dbvisit.com, SMTP: NO, SNMP: NO
4: APPLY1 on orcl
Host: rac11202node1, SMTP: NO, SNMP: NO
Enter number of process to modify it, or "done": [done] |