...
1. When logged onto the desktop, right click and click on "Open Terminal" to bring up the terminal.
2. In the terminal edit /etc/sysconfig/network
...
| No Format |
|---|
NETWORKING=yes HOSTNAME=target |
...
3. Right click on the Network Manager icon on the top right hand corner, and click on "Edit Connections..."
...
There is only one network interface:
- eth1 eth2 which is a fixed IP address. This is used to connect between the source and target servers and also to the Internet. This IP is 10.0.2.5.
...
9. Test if the network connection is working. Use Control-C to stop the ping.
...