Page Comparison

Log onto the second VM (dbv02) through the VirtualBox console which will be shown when the VM has started.

The username is root and the password is oracle

1. When logged onto the desktop, right click and click on "Open Terminal" to bring up the terminal.

Image RemovedImage Added

2. In the terminal edit /etc/sysconfig/networkImage Removed

No Format
vi /etc/sysconfig/network

and change to:

No Format
NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=target

3. Set the network address for eth1

No Format
cd /etc/sysconfig/network-scripts vi ifcfg-eth1

Change the settings to the following

No Format
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] DEVICE=eth1 BOOTPROTO=none ONBOOT=yes HWADDR=08:00:27:19:c2:f8 IPADDR=10.1.1.11 NETMASK=255.255.255.0

4. Restart the network interface

No Format

[root@source network-scripts]# /etc/init.d/network restart
Shutting down interface eth0:                              [  OK  ]
Shutting down interface eth1:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:  
Determining IP information for eth0... done.
                                                           [  OK  ]
Bringing up interface eth1:

5 Right click on the Network Manager icon on the top right hand corner, and click on "Edit Connections..."

Image Added

4. This brings up the Network connections.

Image Added

5. Select "Auto eth1" and select "Delete...". This interface is no longer required.

Image Added

6. Select "Auto eth2" and click on "Edit...".

Image Added

7. Select the "IPv4 Settings" tab. Set the Method to "Manual" and add following details (click on "Add" to add the details):

Address: 10.0.2.5

Netmask: 24

Gateway: 10.0.2.1

DNS Servers: 8.8.8.8

Then click on Apply

Image Added

8. View the network interface

No Format

[root@source network-scripts]# ifconfig
eth0eth2      Link encap:Ethernet  HWaddr 08:00:27:BFC8:36DC:00F6  
          inet addr:10.0.02.215  Bcast:10.0.02.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:febffec8:3600dcf6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:118125169357 errors:0 dropped:0 overruns:0 frame:0
          TX packets:682120225 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:31908626252571529 (30240.48 MiB)  TX bytes:766117239616 (746.89 KiBMiB)
      lo    Interrupt:10 Base address:0xd020  eth1      Link encap:Ethernet  HWaddr 08:00:27:19:C2:F8Local Loopback  
          inet addr:10127.10.1.11  Bcast:10.1.1.2550.1  Mask:255.2550.2550.0
          inet6 addr: fe80::a00:27ff:fe19:c2f8/641/128 Scope:LinkHost
          UP BROADCASTLOOPBACK RUNNING MULTICAST  MTU:150065536  Metric:1
          RX packets:0340 errors:0 dropped:0 overruns:0 frame:0
          TX packets:120340 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:10000 
          RX bytes:022444 (021.09 bKiB)  TX bytes:2311322444 (2221.59 KiB)
          Interrupt:9 Base address:0xd060 
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:35521 errors:0 dropped:0 overruns:0 frame:0
          TX packets:35521 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:7421628 (7.0 MiB)  TX bytes:7421628 (7.0 MiB)

There are 2 network interfaces:

a) eth0 which is a DHCP address so that a connection can be made from the host computer (your laptop). In this case the IP is 10.0.0.21

b) eth1 which is a fixed IP address. This is used to connect between the source and target servers. This IP is 10.1.1.11

6. Restart the VM (dbv02)

No Format
shutdown -r now

...

There is only one network interface:

eth2 which is a fixed IP address. This is used to connect between the source and target servers and also to the Internet. This IP is 10.0.2.5.

9. Test if the network connection is working. Use Control-C to stop the ping.

No Format

ping www.dbvisit.com
PING dbvisit.com (67.222.54.241) 56(84) bytes of data.
64 bytes from 67-222-54-241.unifiedlayer.com (67.222.54.241): icmp_seq=1 ttl=47 time=190 ms
64 bytes from 67-222-54-241.unifiedlayer.com (67.222.54.241): icmp_seq=2 ttl=47 time=189 ms
64 bytes from 67-222-54-241.unifiedlayer.com (67.222.54.241): icmp_seq=3 ttl=47 time=192 ms
64 bytes from 67-222-54-241.unifiedlayer.com (67.222.54.241): icmp_seq=4 ttl=47 time=193 ms
^C

10. Shutdown the VM (dbv02).