Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

This section initialises and starts the replication processes.

1. Go into the home directory of the replication that has been setup by the setup wizard

cd ~oracle/dbvrep_XE

2. The configuration scripts can be inspected if needed. They are in the ./config directory. 

ls ./config
dbvrep_XE-dbsetup_ttorcl_src.sql  dbvrep_XE-grants_ttorcl_trg.sql  dbvrep_XE-wizard-databases.cfg  dbvrep_XE-wizard-tables.cfg
dbvrep_XE-dbsetup_ttorcl_trg.sql  dbvrep_XE-onetime.ddc            dbvrep_XE-wizard-ddc.cfg
dbvrep_XE-grants_ttorcl_src.sql   dbvrep_XE-setup.dbvrep           dbvrep_XE-wizard-pairs.cfg

The following types of scripts are in the config directory

  • SQL scripts. These scripts will run SQL statements in the source or target databases. 
  • CFG scripts. These are used in the setup wizard to remember user inputs. The setup wizard can be run again and the previous input will be displayed based on information in the .cfg files. 
  • DDC scripts. These scripts contain all the configurational settings for the replication. 
  • DBVREP script. This script runs Dbvisit Replicate commands and initialises the replication.

3. The dbvrep_XE-all.sh in the $HOME/dbvrep_XE directory is the main script that calls all the other script to initialise the replication. Start this script

./dbvrep_XE-all.sh

4. The replication is now being initialised. This takes approximately 2-3 minutes.

Setting up Dbvisit Replicate configuration
Configure database ttorcl_src...
This check fails if the DBID is not the expected one...

Ok, check passed.
Configure database ttorcl_trg...
This check fails if the DBID is not the expected one...

Ok, check passed.
Object grants for database ttorcl_src...
Object grants for database ttorcl_trg...
Setting up the configuration
Initializing......done
WARN-1850: No DDC DB available, dictionary table does not exist.
DDC loaded from database (0 variables).
Dbvisit Replicate version 2.7.
Copyright (C) Dbvisit Software Limited.  All rights reserved.
DDC file /u01/app/oracle/dbvrep_XE/config/dbvrep_XE-onetime.ddc loaded.
MINE: Cannot determine Dbvisit Replicate dictionary version. (no dictionary exists)
APPLY: Cannot determine Dbvisit Replicate dictionary version. (no dictionary exists)
dbvrep> #clear the no-DDC-DB-available warning
dbvrep> process clear previous warnings
dbvrep> set ON_WARNING SKIP
Variable ON_WARNING set to SKIP for process *.
dbvrep> set ON_ERROR EXIT
Variable ON_ERROR set to EXIT for process *.
dbvrep> PROCESS SWITCH_REDOLOG
dbvrep> PROCESS SETUP MINE DROP DICTIONARY
0 dictionary objects dropped.
dbvrep> PROCESS SETUP MINE CREATE DICTIONARY
dbvrep> PROCESS SETUP MINE LOAD DICTIONARY
Supplemental logging on database set.
Loading dictionary table DBRSCOL$
Loading dictionary table DBRSIND$
Loading dictionary table DBRSOBJ$
Loading dictionary table DBRSTAB$
Loading dictionary table DBRSUSER$
Loading dictionary table DBRSV_$DATABASE
dbvrep> PROCESS SETUP APPLY DROP DICTIONARY
0 dictionary objects dropped.
dbvrep> PROCESS SETUP APPLY CREATE DICTIONARY
dbvrep> PROCESS SETUP APPLY LOAD DICTIONARY
dbvrep> PROCESS PREPARE_DP SETUP CLEAR
dbvrep> PROCESS SETUP PAIR MINE AND APPLY
Applier SCN set (start=513646, current=513646).
dbvrep> SET APPLY.INSTANTIATE_SCN NOW
Variable INSTANTIATE_SCN set to NOW for process APPLY.
dbvrep> EXCLUDE CREATE TABLE %.DBMS_TABCOMP_TEMP_UNCMP #Ignore tables created by Compression Advisor
Exclude rule created.
dbvrep> EXCLUDE CREATE TABLE %.DBMS_TABCOMP_TEMP_CMP #Ignore tables created by Compression Advisor
Exclude rule created.
dbvrep> SET PREPARE_SCHEMA_EXCEPTIONS none
Variable PREPARE_SCHEMA_EXCEPTIONS set to none for process *.
dbvrep> PROCESS SUPPLEMENTAL LOGGING SCHEMA "REPOE" ENABLE PRIMARY KEY
dbvrep> PROCESS SWITCH_REDOLOG
dbvrep> PROCESS WAIT_SCN_FLIP
Waited 2 seconds until scn_to_timestamp changed.
dbvrep> #single-scn instantiation: lock all tables and schemas
dbvrep> PROCESS LOCK SCHEMAS "REPOE"
Locking all schemas.
Lock done.
dbvrep> #single-scn instantiation: unlock all tables and schemas, but keep the SCN
dbvrep> PROCESS LOCK RELEASE LOCKS
dbvrep>
dbvrep> #prepare the tables (we use OFFLINE as neither MINE not APPLY is running; with OFFLINE we won't wait on network timeout)
dbvrep> PREPARE OFFLINE SCHEMA "REPOE"
Table REPOE.ADDRESSES instantiated at SCN 515210
Table REPOE.CARD_DETAILS instantiated at SCN 515210
Table REPOE.CUSTOMERS instantiated at SCN 515210
Column SYS_NC00017$ is special: virtual column. Excluding.
Column SYS_NC00017$ is special: hidden column. Excluding.
Column SYS_NC00017$ is special: system-generated column. Excluding.
Column SYS_NC00017$ is special: virtual column. Excluding.
Column SYS_NC00018$ is special: virtual column. Excluding.
Column SYS_NC00018$ is special: hidden column. Excluding.
Column SYS_NC00018$ is special: system-generated column. Excluding.
Column SYS_NC00018$ is special: virtual column. Excluding.
Table REPOE.INVENTORIES instantiated at SCN 515210
Table REPOE.LOGON instantiated at SCN 515210
Table REPOE.ORDERENTRY_METADATA instantiated at SCN 515210
Table REPOE.ORDERS instantiated at SCN 515210
Table REPOE.ORDER_ITEMS instantiated at SCN 515210
Table REPOE.PRODUCT_DESCRIPTIONS instantiated at SCN 515210
Table REPOE.PRODUCT_INFORMATION instantiated at SCN 515210
Table REPOE.WAREHOUSES instantiated at SCN 515210
dbvrep>
dbvrep> #single-scn instantiation: unlock all tables and schemas, forget the SCN (so it does not affect any further PREPARE statements)
dbvrep> PROCESS LOCK CLEAR SCN
dbvrep> PROCESS SWITCH_REDOLOG
dbvrep> #prepare script for instantiation
dbvrep> PROCESS PREPARE_DP WRITE DP_NETWORKLINK DIRECTORY DATA_PUMP_DIR
FILE /u01/app/oracle/dbvrep_XE/APPLY.sh DBLINK ttorcl_src USERID
SYSTEM/manager@target
Created Data Pump script /u01/app/oracle/dbvrep_XE/APPLY.sh, using network import.
dbvrep> create ddcdb from ddcfile
DDC loaded into database (346 variables).
dbvrep> set ON_WARNING SKIP
Variable ON_WARNING set to SKIP for process *.
dbvrep> set ON_ERROR SKIP
Variable ON_ERROR set to SKIP for process *.
OK-0: Completed successfully.

 

At the end of the output, the Next Steps to be completed will be shown.

These steps are required after the dbvrep_XE-all.sh script runs:
1) Create the necessary directory(ies) on the servers:
target: /u01/app/oracle/dbvrep_XE
2) Copy the DDC files to the server(s) where the processes will run:
target: /u01/app/oracle/dbvrep_XE/dbvrep_XE-APPLY.ddc
source: /u01/app/oracle/dbvrep_XE/dbvrep_XE-MINE.ddc
3) Review that path to dbvrep executable is correct in the run scripts:
/u01/app/oracle/dbvrep_XE/dbvrep_XE-run-source.sh
/u01/app/oracle/dbvrep_XE/dbvrep_XE-run-target.sh
4) Copy the run script to the server(s) where the processes will run:
source: /u01/app/oracle/dbvrep_XE/dbvrep_XE-run-source.sh
target: /u01/app/oracle/dbvrep_XE/dbvrep_XE-run-target.sh
5) Ensure firewall is open for listen interfaces 0.0.0.0:7902, 0.0.0.0:7901 used by the processes.
6) Make sure the data on apply are in sync as of time when setup was run.
Scripts for Data Pump/export/DDL were created as requested:
/u01/app/oracle/dbvrep_XE/APPLY.sh
Create referenced database links (if any) before running the scripts.
7) Start the replication processes on all servers:
source: /u01/app/oracle/dbvrep_XE/dbvrep_XE-run-source.sh
target: /u01/app/oracle/dbvrep_XE/dbvrep_XE-run-target.sh
8) Start the console to monitor the progress:
/u01/app/oracle/dbvrep_XE/start-console.sh
The above list is stored in /u01/app/oracle/dbvrep_XE/Nextsteps.txt.

Complete the Configuration

Follow the Next Steps instructions to complete the configuration.

On the target server, as oracle, create the /u01/app/oracle/dbvrep_XE directory

mkdir /u01/app/oracle/dbvrep_XE

6. On the source server, as oracle, copy the DDC file to the target server using scp. The oracle account password is oracle on both machines. The Dbvisit Database Configuration file contains all the configurational settings for the replication.

scp /u01/app/oracle/dbvrep_XE/dbvrep_XE-APPLY.ddc oracle@target:/u01/app/oracle/dbvrep_XE/dbvrep_XE-APPLY.ddc
The authenticity of host 'target (192.168.56.67)' can't be established.
RSA key fingerprint is 4b:6c:47:e5:ba:cd:45:5f:22:f3:b8:c7:5e:40:1f:27.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'target,192.168.56.67' (RSA) to the list of known hosts.
oracle@target's password:
dbvrep_XE-APPLY.ddc                                         100%  522     0.5KB/s   00:00

7. On the source server, as oracle, copy the dbvrep_XE-run-target.sh file to the target server using scp. The oracle account password is oracle on both machines.

scp /u01/app/oracle/dbvrep_XE/dbvrep_XE-run-target.sh oracle@target:/u01/app/oracle/dbvrep_XE/dbvrep_XE-run-target.sh
oracle@target's password:
dbvrep_XE-run-target.sh                                                                 100%  108     0.1KB/s   00:00

The word "target" in dbvrep_orcl-run-target.sh is dependent on your target hostname. In this case, the target hostname is called target

The replication is now ready to be instantiated by performing the initial load.

 

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.