Target Kafka (via Kafka Connect)

[root@dbvrep01 /usr/dbvisit/replicate] # mv dbvrep dbvpf
[root@dbvrep01 /usr/dbvisit/replicate] # ls -ltr
total 66340
-rw-r--r-- 1 root root 100518 Oct 27 05:42 README.txt
-rw-r--r-- 1 root root 120 Oct 27 05:42 online_user_guide_reference_dbvrep.txt
-rwxr-xr-x 1 root root 67806725 Oct 27 05:42 dbvpf
-rw-r--r-- 1 root root 15892 Oct 27 05:42 Dbvisit-MIB-SNMP.txt
[root@dbvrep01 /usr/dbvisit/replicate] #

[oracle@dbvrep01 REPCON]$ /usr/dbvisit/replicate/dbvpf
Initializing......done
Dbvisit PureFlow version 2.9.00
Copyright (C) Dbvisit Software Limited. All rights reserved.
No DDC file loaded.
Run "setup wizard" to start the configuration wizard or try "help" to see all commands available.
dbvpf> setup wizard
[Integration option enabled]
This wizard configures Dbvisit PureFlow.

The setup wizard creates configuration scripts, which need to be run after the wizard ends. No changes to the databases are made before that.

The progress is saved every time a list of databases, replications, etc. is shown. It will be re-read if wizard is restarted and the same DDC name and script path is selected.
Run the wizard now? [Yes]

[oracle@dbvrep01 REPCON]$ /usr/dbvisit/replicate/dbvpf
Initializing......done
Dbvisit PureFlow version 2.9.00
Copyright (C) Dbvisit Software Limited.  All rights reserved.
No DDC file loaded.
Run "setup wizard" to start the configuration wizard or try "help" to see all commands available.
dbvpf> setup wizard
[Integration option enabled]
This wizard configures Dbvisit PureFlow.

The setup wizard creates configuration scripts, which need to be run after the wizard ends. No changes to the databases are made before that.

The progress is saved every time a list of databases, replications, etc. is shown. It will be re-read if wizard is restarted and the same DDC name and
script path is selected.
Run the wizard now? [Yes] yes

Before starting the actual configuration, some basic information is needed. The DDC name and script path determines where all files created by the wizard go
(and where to reread them if wizard is rerun) and the license key determines which options are available for this configuration.
(DDC_NAME) - Please enter a name for this replication: [] REPCON-TEST
(LICENSE_KEY) - Please enter your license key: [I0JSW-898RU-TL6QF-BJLHR-0U7GN-M99I2-F2OP5]
(SETUP_SCRIPT_PATH) - Please enter a directory for location of configuration scripts on this machine: [/home/oracle/REPCON-TEST]

Network configuration files were detected on this system in these locations:
/u01/app/oracle/product/11.2.0/xe/network/admin
(TNS_ADMIN) - Please enter TNS configuration directory for this machine: [/u01/app/oracle/product/11.2.0/xe/network/admin]

Step 1 - Describe databases
========================================
The first step is to describe databases used in the replication. There are usually two of them (source and target).
Store SYSDBA and DBA passwords? Passwords only required during setup and initialization? (Yes/No) [Yes]
Let's configure the database, describing its type, connectivity, user names etc.
What type of database is this? (Oracle/MySQL/Google Cloud SQL/SQL Server/Oracle AWS RDS/CSV/Hadoop): [Oracle]
Please enter database TNS alias: [] XE
Please enter SYSDBA user name: [SYS]
Please enter password for this user: [change_on_install]
Please enter user with DBA role: [SYSTEM]
Please enter password for this user: [manager]

Connecting to database XE as SYSTEM to query list of tablespaces and to detect ASM (by looking whether any redo logs or archived logs are stored in ASM).
Enter the Dbvisit PureFlow owner (this user will be created by this script): [dbvrep]
Please enter password for this user: [dbvpasswd]

Permanent tablespaces detected on the database: DATA, USERS.
Please enter default permanent tablespace for this user: [DATA] USERS

Temporary tablespaces detected on the database: TEMP.
Please enter default temporary tablespace for this user: [TEMP]

Following databases are now configured:
1: Oracle XE, SYS/***, SYSTEM/***, dbvrep/***, USERS/TEMP, dbvrep/, ASM:No, TZ: +00:00
Enter the number of the database to modify it or "done": [done]

Step 2 - Replication pairs
========================================
The second step is to set source and targets for each replication pair.
Let's configure the replication pair, selecting source and target.
Following databases are described:
1: XE (Oracle)
2: Dbvisit PureFlow (dbvpf) (cannot be source, is not Oracle)
Select source database: [1]
Select target database: [2]
Will limited DDL replication be enabled? (Yes/No) [Yes]
Use fetcher to offload the mining to a different server? (Yes/No) [No]
Should where clauses (and Event Streaming) include all columns, not just changed and PK? (Yes/No) [Yes]
Would you like to encrypt the data across the network? (Yes/No) [No]
Would you like to compress the data across the network? (Yes/No) [No]
How long do you want to set the network timeouts. Recommended range between 60-300 seconds [60]
Lock and copy the data initially one-by-one or at a single SCN?
one-by-one : Lock tables one by one and capture SCN
single-scn : One SCN for all tables
ddl-only   : Only DDL script for target objects
resetlogs  : Use SCN from last resetlogs operation (standby activation, rman incomplete recovery)
no-lock    : Do not lock tables. Captures previous SCN of oldest active transaction. Requires pre-requisite running of pre-all.sh script                     (one-by-one/single-scn/ddl-only/resetlogs/no-lock) [single-scn] no-lock

What data instantiation script to create?
scn_list       : A file with SCN for every replicated object is created (APPLY.txt)
load           : All replicated data is created and loaded automatically
none                                                                                                                                                         (scn_list/load/none) [scn_list] load

Following replication pairs are now configured:
1: XE (Oracle) ==> Dbvisit PureFlow (dbvpf), DDL: Yes, fetcher: No, process suffix: (no suffix), compression: No, encryption: No, network timeout: 60,
prepare type: no-lock, data load: load_keep
Enter number of replication pair to modify it, or "add", or "done": [done]

Step 3 - Replicated tables
========================================
The third step is to choose the schemas and tables to be replicated. If the databases are reachable, the tables are checked for existence, datatype support,
etc., schemas are queried for tables. Note that all messages are merely hints/warnings and may be ignored if issues are rectified before the scripts are
actually executed.

Following tables are defined for replication pairs:
1: XE (Oracle) ==> Dbvisit PureFlow (dbvpf), DDL: Yes, suffix: (no suffix), prepare: no-lock
  No tables defined.
Enter number of replication pair to modify it, or "done": [1]

Please enter list of all individual tables to be replicated. Enter schema name(s) only to replicate all tables in that schema. Use comma or space to delimit
the entries.
Enter the tables and schemas: [] SOE,SCOTT
Selected schemas: SCOTT,SOE
Add more tables or schemas? (Yes/No) [No]

You can also specify some advanced options:
1. Exclude some tables from schema-level replication
2. Rename schemas or tables.
3. Specify filtering conditions.
4. (Tables only) Configure Event Streaming; this does not maintain a copy of the source table, but logs all operations as separate entries. This is useful
for ETL or as an audit trail. This usually requires adding of new columns (timestamps, old/new values etc.) to the target table.
Specify rename name, filter condition or audit for any of the specified schemas? (Yes/No) [No]
(PREPARE_SCHEMA_EXCEPTIONS) - Specify tables to exclude from PREPARE SCHEMA, if any: []

Following tables are defined for replication pairs:
1: XE (Oracle) ==> Dbvisit PureFlow (dbvpf), DDL: Yes, suffix: (no suffix), prepare: no-lock
  SCOTT(tables), SOE(tables)
Enter number of replication pair to modify it, or "done": [done]

Step 4 - Process configuration
========================================
The fourth step is to configure the replication processes for each replication.

Following processes are defined:
1: MINE on XE
  Not configured.
Enter number of process to modify it, or "done": [1]
Fully qualified name of the server for the process (usually co-located with the database, unless mine is offloaded using fetcher): [dbvrep01]
Server type (Windows/Linux/Unix): [Linux]
Enable email notifications about problems? (Yes/No) [No]
Enable SNMP traps/notifications about problems? (Yes/No) [No]
Directory with DDC file and default where to create log files etc. (recommended: same as global setting, if possible)? [/home/oracle/REPCON-TEST]

Following settings were pre-filled with defaults or your reloaded settings:
----------------------------------------
[MINE_REMOTE_INTERFACE]: Network remote interface: dbvrep01:7901
[MINE_DATABASE]: Database TNS: XE
[TNS_ADMIN]: tnsnames.ora path: /u01/app/oracle/product/11.2.0/xe/network/admin
[MINE_PLOG]: Filemask for generated plogs: /home/oracle/REPCON-TEST/mine/%S.%E.%Z (%S is sequence, %T thread, %F original filename (stripped extension), %P
process type, %N process name, %E default extension)
[LOG_FILE]: General log file: /home/oracle/REPCON-TEST/log/dbvpf_%N_%D.%E
[LOG_FILE_TRACE]: Error traces: /home/oracle/REPCON-TEST/log/trace/dbvpf_%N_%D_%I_%U.%E

Checking that these settings are valid...
Do you want to change any of the settings? [No]

Following processes are defined:
1: MINE on XE
  Host: dbvrep01, SMTP: No, SNMP: No
Enter number of process to modify it, or "done": [done]
Created file /home/oracle/REPCON-TEST/REPCON-TEST-MINE.ddc.
Created file /home/oracle/REPCON-TEST/config/REPCON-TEST-setup.dbvpf.
Created file /home/oracle/REPCON-TEST/config/REPCON-TEST-dbsetup_XE_dbvrep.sql.
Created file /home/oracle/REPCON-TEST/config/REPCON-TEST-grants_XE_dbvrep.sql.
Created file /home/oracle/REPCON-TEST/config/REPCON-TEST-pre-suplog_XE_dbvrep.sql.
Created file /home/oracle/REPCON-TEST/REPCON-TEST-pre-all.sh.
Created file /home/oracle/REPCON-TEST/config/REPCON-TEST-onetime.ddc.
Created file /home/oracle/REPCON-TEST/start-console.sh.
Created file /home/oracle/REPCON-TEST/REPCON-TEST-run-dbvrep01.sh.
Created file /home/oracle/REPCON-TEST/scripts/REPCON-TEST-dbvrep01-start-MINE.sh.
Created file /home/oracle/REPCON-TEST/scripts/REPCON-TEST-dbvrep01-stop-MINE.sh.
Created file /home/oracle/REPCON-TEST/scripts/REPCON-TEST-dbvrep01-dbvpf-MINE.sh.
Created file /home/oracle/REPCON-TEST/scripts/systemd-dbvpf-MINE_REPCON-TEST.service.
Created file /home/oracle/REPCON-TEST/scripts/upstart-dbvpf-MINE_REPCON-TEST.conf.
Created file /home/oracle/REPCON-TEST/Nextsteps.txt.
Created file /home/oracle/REPCON-TEST/REPCON-TEST-all.sh.
===========================================================================================================================================================

Dbvisit PureFlow wizard completed
Script /home/oracle/REPCON-TEST/REPCON-TEST-pre-all.sh created. This needs to be run when transactions are not active on source database either during
maintenance window or when there is no/low activity on source database.
Script /home/oracle/REPCON-TEST/REPCON-TEST-all.sh created. This runs all the above created scripts. Please exit out of dbvpf, review and run script as
current user to setup and start Dbvisit PureFlow.
===========================================================================================================================================================
Optionally, the script can be invoked now by this wizard.
Run this script now? (Yes/No) [No]
dbvpf> exit